Energy efficient home improvement credit
Allowance of credit
In the case of an individual, there shall be allowed as a credit against the tax imposed by this chapter for the taxable year an amount equal to 30 percent of the sum of—
the amount paid or incurred by the taxpayer for qualified energy efficiency improvements installed during such taxable year,
the amount of the residential energy property expenditures paid or incurred by the taxpayer during such taxable year, and
the amount paid or incurred by the taxpayer during the taxable year for home energy audits.
Limitations
In general
Energy property
Windows
Doors
The credit allowed under this section by reason of subsection (a)(1) with respect to any taxpayer for any taxable year shall not exceed—
$250 in the case of any exterior door, and
$500 in the aggregate with respect to all exterior doors.
Heat pump and heat pump water heaters; biomass stoves and boilers
Home energy audits
Dollar limitation
Substantiation requirement
Qualified energy efficiency improvements
For purposes of this section—
In general
The term “qualified energy efficiency improvements” means any energy efficient building envelope component, if—
such component is installed in or on a dwelling unit located in the United States and owned and used by the taxpayer as the taxpayer’s principal residence (within the meaning of section 121),
the original use of such component commences with the taxpayer, and
such component reasonably can be expected to remain in use for at least 5 years.
Energy efficient building envelope component
The term “energy efficient building envelope component” means a building envelope component which meets—
in the case of an exterior window or skylight, Energy Star most efficient certification requirements,
in the case of an exterior door, applicable Energy Star requirements, and
in the case of any other component, the prescriptive criteria for such component established by the most recent International Energy Conservation Code standard in effect as of the beginning of the calendar year which is 2 years prior to the calendar year in which such component is placed in service.
Building envelope component
The term “building envelope component” means—
any insulation material or system, including air sealing material or system, which is specifically and primarily designed to reduce the heat loss or gain of a dwelling unit when installed in or on such dwelling unit,
exterior windows (including skylights), and
exterior doors.
Manufactured homes included
Residential energy property expenditures
For purposes of this section—
In general
The term “residential energy property expenditures” means expenditures made by the taxpayer for qualified energy property which is—
installed on or in connection with a dwelling unit located in the United States and used as a residence by the taxpayer, and
originally placed in service by the taxpayer.
Such term includes expenditures for labor costs properly allocable to the onsite preparation, assembly, or original installation of the property.
Qualified energy property
The term “qualified energy property” means any of the following:
Any of the following which meet or exceed the highest efficiency tier (not including any advanced tier) established by the Consortium for Energy Efficiency which is in effect as of the beginning of the calendar year in which the property is placed in service:
An electric or natural gas heat pump water heater.
An electric or natural gas heat pump.
A central air conditioner.
A natural gas, propane, or oil water heater.
A natural gas, propane, or oil furnace or hot water boiler.
A biomass stove or boiler which—
uses the burning of biomass fuel to heat a dwelling unit located in the United States and used as a residence by the taxpayer, or to heat water for use in such a dwelling unit, and
has a thermal efficiency rating of at least 75 percent (measured by the higher heating value of the fuel).
Any oil furnace or hot water boiler which—
meets or exceeds 2021 Energy Star efficiency criteria, and
is rated by the manufacturer for use with fuel blends at least 20 percent of the volume of which consists of an eligible fuel.
Any improvement to, or replacement of, a panelboard, sub-panelboard, branch circuits, or feeders which—
is installed in a manner consistent with the National Electric Code,
has a load capacity of not less than 200 amps,
is installed in conjunction with—
any qualified energy efficiency improvements, or
any qualified energy property described in subparagraphs (A) through (C) for which a credit is allowed under this section for expenditures with respect to such property, and
enables the installation and use of any property described in subclause (I) or (II) of clause (iii).
Eligible fuel
For purposes of paragraph (2), the term “eligible fuel” means—
biodiesel and renewable diesel (within the meaning of section 40A),
second generation biofuel (within the meaning of section 40), and
transportation fuel (as defined in section 45Z(d)(5)).
Home energy audits
For purposes of this section, the term “home energy audit” means an inspection and written report with respect to a dwelling unit located in the United States and owned or used by the taxpayer as the taxpayer’s principal residence (within the meaning of section 121) which—
identifies the most significant and cost-effective energy efficiency improvements with respect to such dwelling unit, including an estimate of the energy and cost savings with respect to each such improvement, and
is conducted and prepared by a home energy auditor that meets the certification or other requirements specified by the Secretary in regulations or other guidance (as prescribed by the Secretary not later than 365 days after the date of the enactment of this subsection).
Special rules
For purposes of this section—
Application of rules
Joint ownership of energy items
In general
Limits applied separately
Property financed by subsidized energy financing
Basis adjustments
Product identification number requirement
In general
No credit shall be allowed under subsection (a) with respect to any item of specified property placed in service after
such item is produced by a qualified manufacturer, and
the taxpayer includes the qualified product identification number of such item on the return of tax for the taxable year.
Qualified product identification number
Qualified manufacturer
For purposes of this section, the term “qualified manufacturer” means any manufacturer of specified property which enters into an agreement with the Secretary which provides that such manufacturer will—
assign a product identification number to each item of specified property produced by such manufacturer utilizing a methodology that will ensure that such number (including any alphanumeric) is unique to each such item (by utilizing numbers or letters which are unique to such manufacturer or by such other method as the Secretary may provide),
label such item with such number in such manner as the Secretary may provide, and
make periodic written reports to the Secretary (at such times and in such manner as the Secretary may provide) of the product identification numbers so assigned and including such information as the Secretary may require with respect to the item of specified property to which such number was so assigned.
Specified property
Termination
Source
(Added Pub. L. 109–58, title XIII, § 1333(a),Notes
Editorial Notes
References in Text
Amendments
Statutory Notes and Related Subsidiaries
Effective Date of 2022 Amendment
In general.—
Except as otherwise provided by this subsection, the amendments made by this section [amending this section and sections 1016 and 6213 of this title] shall apply to property placed in service after
Extension of credit.—
The amendments made by subsection (a) [amending this section] shall apply to property placed in service after
Identification number requirement.—
The amendments made by subsection (g) [amending this section and section 6213 of this title] shall apply to property placed in service after
Effective Date of 2020 Amendment
Effective Date of 2019 Amendment
Effective Date of 2018 Amendment
Effective Date of 2015 Amendment
Extension.—
The amendment made by subsection (a) [amending this section] shall apply to property placed in service after
Modification.—
The amendments made by subsection (b) [amending this section] shall apply to property placed in service after
Effective Date of 2014 Amendment
Effective Date of 2013 Amendment
Effective Date of 2010 Amendment
Effective Date of 2009 Amendment
In general.—
Except as provided in paragraph (2), the amendment made by this section [amending this section and sections 25D and 48 to 48B of this title] shall apply to periods after
Conforming amendments.—
The amendments made by subparagraphs (A) and (B) of subsection (b)(2) [amending this section and section 25D of this title] shall apply to taxable years beginning after
In general.—
Except as provided in paragraph (2), the amendments made by this section [amending this section] shall apply to taxable years beginning after
Efficiency standards.—
The amendments made by paragraphs (1), (2), and (3) of subsection (b) and subsections (c) and (d) shall apply to property placed in service after the date of the enactment of this Act [
Effective Date of 2008 Amendment
In general.—
Except as provided in paragraph (2), the amendments made [by] this section [amending this section] shall apply to expenditures made after
Modification of qualified energy efficiency improvements.—
The amendments made by subsection (e) [amending this section] shall apply to property placed in service after the date of the enactment of this Act [